Our Product Range

The Right Ballast for the Right Job

We stock and supply Canbus variants in both 55 and 35 watts.

Also Super Fast Start 55 and 35 watt variants - ideally suited for the high beam on any make of bike.

And our powerful hard core 35 watt ballasts with are ideal for all of your aux lighting needs.

 

Ultra50

aboutThis is our super bright Canbus 50 watt ballast.

HID Canbus Ballast X5 55w Specification:
CE, ROHS Input voltage 12v
Output power 55w
Lifetime 3-6 years
Work Temperature -40ºC ±105ºC
Output wattage 55W ± 1W
Input Voltage 9-16V
Normal Voltage 12.0V
Max input current 5.6 ± 0.3A
Normal Current 4.50 ± 0.1A

Bulbs, 4300K, 5K and 6K, these are available in standard or Ceramic Core, if a single kit is purchased appropriate R bulb will be included in the kit.

4300 close to halogen colour/OEM HiD colour
5K white light, camera flash
6K Directly overhead sunlight at the equator (the surface temp of the sun)

50 Watt UItra

More...

 

Ultra35

aboutThis our super bright Ulta-35 HID light,

35w Slim Ballast Specification:
High efficiency 89%, surface temperature 57C after 2hours using.
Input voltage: 9V~16V
Input current : 3.5A
Output Power: 35W
Operation Temperature:-40~105ºC
T CASE: - 40 ~ 120ºC
Life: More Than 2500hrs
Yellow sticker on the backside
Warranty: 12 months
CE Certification

35 watt bulbs available are the 4300K, 5k and 6K in standard HiD and the Top Spec Ceramic Core, with R rated bulbs supplied were required at no extra cost.

35 Watt Ultra 35 Watt

More...

 

Canbus 35 Watt

aboutHiD50 Ultra canbus ballasts, have the highest spec top grade internal EU components, these units are then assembled in Asia, date stamped cases, were they are factory tested for reliability and quality.

The Ultra 35 canbus ballast is an ideal unit for any twin beam head light motorcycle with canbus fitted, ordinary units will fail or intermittent start on ignition turn over due to the power starvation from the Canbus system.

Canbus 35 Watt Specification:

Input Voltage 9-16V
Normal Voltage 12.0V
Work Temperature -40ºC ±105ºC 5.6 ± 0.3A
Output wattage 35W(55w) ± 1W 4.50 ± 0.1A
5.6 ± 0.3A Max input current Normal Current 4.50 ± 0.1A

Certification: CE, RoSH, ISO-9001-2000
Waterproof, Shockproof and Vibration Resistant

35 Watt Canbus Ballast

More...

 

Fast Bright Ballasts

aboutAvailable in 35 and 50 watt, this ballast is the fastest on the market with only 0.01 second fire time, the perfect unit for the high beam on any vehicle, EU internals, which is the standard for HiD50 units, fully water proof and vibration tested, these units have been pre run and tested at the factory as well as a burning in time with the bulbs before dispatch from ourselves.

Fast Bright Ballast

More...

 

Plug n Play Ballast Kits

about1200GS and 1200GSA (04-2013) Plug n Play Kit - NOT WC

These are the ultimate set up, in convince, and ease, all parts supplied ready to bolt on, no wires to cut, total compatibility with the bikes and fully reversible.

A custom made Stainless Steel bracket, with ballast or ballasts attached, all Stainless fittings, new BMW light caps, drilled with pre mounted bulbs.

Kits available in a variety of configurations and powers to suit requirements, from standard ballasts and bulbs, to top grade Ceramic Core bulbs and fast Bright high beam ballast, supplied with LED side light bulb, full instructions and your selection of bulb color.

Please mail to discuss your requirements.

More...

 

Bulb Fitments

aboutOur Amazing range of HID Bulbs

Xenon hid 55w and 35 watt bulbs,

EU manufacture
Certification: CE,RoHS, Emark

Starting Voltage 23000v
Power 35 and 55w,12v
Color temp 4300k,5000K,6000k,
Luminance 2200-3300LM
Lifespan 3500 hours
Bulb type D2S,H1/H3/H4/H7/H9/H11

Bulbs available in R rated anti dazzle.
High quality Ceramic Core available,
90º rear fitments, ideal for Ducati MTS, GSA fogs etc

Bulbs

More...

 

KTM Lighting Kit

aboutFor the optimum HiD50 kit on the KTM, fit the H7R ceramic core anti dazzle bulb in the dip beam and the Fast Bright ballast on the high beam, using a Ceramic Core H3 for Instant and Ultimate light. Kit available in 35watt dip and 50watt high beam, or any variation to suit the rider requirements. Choice of 5K or 6K bulb colour.

Due to the complicated number of options for this lighting set please POA for further information.

More...

 

Triumph Lighting Kit

aboutThis our super bright Triumph Lighting Kit.

Due to the complicated number of options for this lighting set please POA for further information.

More...

 

Auxilliary Lights

about

Hella DE and Hella FF50 aux light kits available, these can be supplied in standard Halogen or converted to HiD, in 35 w or 50 w powers, the conversion on the DE, is better than factory kit, these lights are the go any were adventure lights.

More...

 

Senna SMH10

aboutOur world famous Motorcycle communications kit

The Sena SMH10 is a Bluetooth V2.1 Class 1 Stereo Headset with long range Bluetooth Intercom designed specifically for motorcyclists. With the SMH10, you can call hands-free on your bluetooth mobile phone, listen to stereo music or voice instructions of GPS navigations by Bluetooth wirelessly, and have intercom conversations in full duplex with a passenger or other motorcycle riders.

More...

 

8 SMD LED SUPER WHITE 501 Canbus BULB

about

360º VIEWING - 4 ON THE TOP & 2 on EACH SIDE
Come with built-in Canbus load resistors to avoid OBC error code
T10/W5W/194 FITTINGS

EACH BULB CONTAINS 8 WHITE LEDS

RUN OFF LESS THAN 1 WATT OF POWER

LIFE EXPECTANCY OF 20,000 HOURS+