Ultra 50 Kit

What's included?
A HiD50 high performance 50 watt waterproof ballast supplied with 50 watt ceramic core UV shielded Burner.





Ultra thin 50 watt Canbus Ballast, need no brackets and can be custom fit to a suitable surface, supplied with fitting instructions.
Custom made stainless steel ballast brackets for 1200 GS/GSA range available, details on installation page.

All kits are pre tested before leaving the factory.

HID Canbus Ballast X5 55w Specification:
CE, ROHS Input voltage 12v
Output power 55w
Lifetime 3-6 years
Work Temperature -40ºC ±105ºC
Output wattage 55W ± 1W
Input Voltage 9-16V
Normal Voltage 12.0V
Max input current 5.6 ± 0.3A
Normal Current 4.50 ± 0.1A

NOTE: We have tried and tested kits and components from a number of factories and suppliers and while there is little to no difference in terms of light output, there is a enormous difference in terms of the quality of components that goes into the kits and the subsequent reliability of those kits. We have chosen not to save a few quid here and there by using cheaper kits and have gone for the best components at every choice. We also insist our suppliers test each and every kit for 24 hours before packaging. The result is we trade on our name, with the most durable and reliable kits on the market.

For example: Our UltraThin ballasts are not just water resistant, our UltraThin ballasts work under water. Ask other HID suppliers what happens with their ballasts if you try and run them while the ballast is immersed in a jar of water.

The current ballasts and bulbs have been installed tested and used on a wide variety of dirt, road and adventure motorcycles (and even the occasional car) across Europe, North America, South Africa and Australia for several years. They withstand rain, dirt, mud, dust and vibrations that go with all of those environments. We stand by our products and will replace any defective parts within a year of purchase.

Ultra-50: Ballasts
Ultra-Thin 50 watt ballasts. The UltraThin 50s are not only around a third the size of conventional ballasts, but they feature a quicker response from cold to full power, unlike the vast bulk of HID ballasts which take 4 -5 seconds to approach full power. These measure 90 x 65 mm (3.5 x 2.5 inches) and are a mere 13 mm (half an inch) thick. Ultra-Thin 50 are the most rugged and durable 50 watt ballast on the market.

All HID50 ballasts are waterproof and dust-proof. Additionally, they feature:

(a) Overload protection. The ballasts cut out at 18 volts to prevent electrical damage.

(b) Low Voltage Protection. The ballasts shut down at 8 volts or under to prevent drawing excessive current from the battery.

Options